Ecommerce CFO and Profitability
Contribution Margin for Amazon Sellers: CM1, CM2 and CM3
How Amazon sellers calculate contribution margin per unit (CM1, CM2, CM3) with a full waterfall, SKU comparison, break-even ACoS and break-even volume examples.
Contribution margin is the money a sale leaves over, after every cost that rises with that sale, to pay for fixed overhead and profit. For an Amazon seller that means net selling price less landed product cost, referral and FBA fees, returns, storage and advertising. Split it into layers (CM1, CM2, CM3) so that you can see where each SKU’s margin goes and decide what to price, advertise, fix or cut.
Gross margin hides most of an Amazon seller’s variable costs, so it’s a poor guide to which products make money. This guide defines the layers, builds a full per-unit waterfall, compares three SKUs, and uses the results to work out break-even ACoS and break-even volume.
Key definitions
| Term | Definition |
|---|---|
| Net revenue per unit | Selling price less average discounts, coupons and promotions per unit (excluding sales tax) |
| Landed cost | Product cost including freight, duties and prep (see how to calculate landed cost) |
| Variable cost | A cost that rises with each unit sold: landed cost, referral fee, FBA fee, returns, storage, advertising |
| Fixed cost | A cost that doesn’t change with units sold in the short term: salaries, software, rent, professional fees |
| Contribution margin (CM) | Net revenue less variable costs, per unit or in total |
| ACoS | Advertising cost of sale: ad spend divided by ad-attributed sales |
| TACoS | Total advertising cost of sale: ad spend divided by total sales |
The three layers
Naming conventions vary across the industry. In this guide:
| Layer | Equals | Answers the question |
|---|---|---|
| CM1 | Net revenue − landed cost − referral fee − FBA fulfillment fee | Is the product economically viable on Amazon at this price? |
| CM2 | CM1 − returns cost − storage and inbound costs | Is it viable after the costs of holding stock and handling returns? |
| CM3 | CM2 − advertising | Does it make money after the ad spend it takes to sell it? |
Fixed costs are deliberately excluded. They’re covered by the sum of all SKUs’ CM3 and don’t belong to any one unit.
Worked example: a per-unit waterfall
Illustrative example. The figures are invented for teaching and do not describe a real client. Fees are rounded illustrations, not Amazon’s current fee schedule.
SKU X, a kitchen product, sells for $34.99. Promotions and coupons average $1.20 per unit sold. The referral fee is 15% of the sales price.
| Line | Per unit | % of net revenue |
|---|---|---|
| List price | $34.99 | |
| Less: average promotions and coupons | ($1.20) | |
| Net revenue | $33.79 | 100.0% |
| Less: landed cost | ($8.90) | 26.3% |
| Gross margin | $24.89 | 73.7% |
| Less: referral fee (15% of $33.79) | ($5.07) | 15.0% |
| Less: FBA fulfillment fee | ($6.10) | 18.1% |
| CM1 | $13.72 | 40.6% |
| Less: returns cost (6% return rate x unrecoverable value, per unit sold) | ($0.85) | 2.5% |
| Less: storage and inbound placement, per unit sold | ($0.62) | 1.8% |
| CM2 | $12.25 | 36.3% |
| Less: advertising per unit sold (TACoS 13%) | ($4.39) | 13.0% |
| CM3 | $7.86 | 23.3% |
A 73.7% gross margin sounds excellent. After Amazon’s fees, returns, storage and the ads it takes to keep the product ranking, $7.86 is left per unit to pay for everything else. That figure, not the gross margin, is what to use for pricing, inventory and ad decisions.
Two inputs that sellers often get wrong:
- Returns cost isn’t the refund. The refund reverses revenue. The cost is what you lose on the return: units that come back unsellable, return shipping you pay for, and fees Amazon doesn’t refund. Spread it over all units sold, not just returned ones.
- Storage per unit sold should come from actual storage fees for the SKU over a recent period divided by units sold in the same period. A slow seller can carry several times the storage per unit of a fast one.
Comparing SKUs: when gross margin lies
Illustrative example, continuing with two more SKUs from the same catalog.
| Per unit | SKU X (kitchen) | SKU Y (small accessory) | SKU Z (bulky storage unit) |
|---|---|---|---|
| Net revenue | $33.79 | $19.99 | $59.99 |
| Landed cost | ($8.90) | ($4.10) | ($21.50) |
| Gross margin % | 73.7% | 79.5% | 64.2% |
| Referral fee | ($5.07) | ($3.00) | ($9.00) |
| FBA fulfillment fee | ($6.10) | ($3.77) | ($14.80) |
| CM1 | $13.72 | $9.12 | $14.69 |
| Returns cost | ($0.85) | ($0.30) | ($2.40) |
| Storage and inbound | ($0.62) | ($0.25) | ($3.90) |
| CM2 | $12.25 | $8.57 | $8.39 |
| Advertising | ($4.39) | ($2.60) | ($9.60) |
| CM3 | $7.86 | $5.97 | ($1.21) |
| CM3 % | 23.3% | 29.9% | (2.0%) |
SKU Z has the highest revenue per unit and the largest CM1 in dollars, and a respectable 64% gross margin. Yet it loses $1.21 on every unit sold once storage, returns and advertising are included. Every additional sale makes the business poorer. Options, in rough order of preference:
- Raise the price and accept lower volume. A $3 increase alone, with fees and ad spend recalculated on the higher price, would likely turn CM3 positive.
- Cut ad spend to the level CM2 can support (see break-even ACoS below), even at lower volume.
- Reduce storage by ordering smaller, more frequent shipments.
- Attack the returns rate, for example with better listing images and dimensions for a bulky item.
- Reduce landed cost or packaging size, which also lowers the FBA fee tier.
- Discontinue if none of these work.
SKU Y, meanwhile, has the lowest revenue and the lowest CM1 in dollars but the best CM3 percentage. If capital is scarce, the next purchase order should probably favor Y. The Amazon profit calculator runs the same layers for a single SKU.
Break-even ACoS: how much advertising a SKU can afford
For ad-attributed sales, the most you can spend on advertising per sale without losing money is the whole of CM2. So:
Break-even ACoS = CM2 ÷ net revenue
| SKU | CM2 | Net revenue | Break-even ACoS |
|---|---|---|---|
| X | $12.25 | $33.79 | 36.3% |
| Y | $8.57 | $19.99 | 42.9% |
| Z | $8.39 | $59.99 | 14.0% |
A campaign on SKU Z running at a 25% ACoS loses money on every attributed sale, even though 25% would be acceptable on SKU X or Y. A single account-wide ACoS target misallocates ad spend for exactly this reason. Set targets by SKU, below the break-even figure by whatever profit margin you want per sale. Treatment of ad spend in the books is covered in Amazon PPC advertising expense accounting.
Break-even volume: how many units cover your overhead
Once CM3 per unit is known, fixed costs tell you how many units the business needs to sell to break even:
Break-even units = monthly fixed costs ÷ CM3 per unit
Illustrative example. If the business’s fixed costs are $18,000 a month and it sold only SKU X:
$18,000 ÷ $7.86 = 2,290.08, so 2,291 units a month to break even.
With a mix of SKUs, use the weighted-average CM3 per unit based on your expected sales mix. Run the numbers in the Amazon break-even calculator, and revisit them whenever fees, landed cost or the sales mix changes.
Building contribution margin from your books
Per-unit figures are only as good as the data behind them:
| Input | Where it should come from |
|---|---|
| Net revenue, promotions | Settlement data by SKU (via a connector or the settlement report) |
| Landed cost | Inventory system or COGS workbook, updated each shipment |
| Referral and FBA fees | Settlement data by SKU, not the fee preview |
| Returns cost | Refund and returns data by SKU, plus unsellable-return write-offs |
| Storage and inbound | Storage fee reports by SKU, plus inbound fees, divided by units sold |
| Advertising | Advertising console spend by SKU or by campaign mapped to SKUs |
| Fixed costs | Operating expenses from the P&L |
Two practical rules: use trailing 60 to 90 days of data, so that one unusual week doesn’t decide a SKU’s fate, and reconcile the totals to the P&L. The sum of every SKU’s CM3, less fixed costs, should approximately equal operating profit for the same period. If it doesn’t, an input is missing or double-counted. If your P&L can’t support this analysis yet, start with what true profit means for Amazon sellers.
Where to use contribution margin
- Pricing: test any price change at CM3, with fees and ad spend recalculated.
- Purchasing: prioritize cash for SKUs with the highest CM3 per dollar of inventory.
- Advertising: set ACoS targets by SKU from CM2.
- Catalog decisions: fix or exit SKUs with negative CM3.
- Channel decisions: the same layers applied by channel show whether Shopify, Walmart or Amazon earns the most per unit. See multichannel ecommerce bookkeeping.
Where to get help
Contribution margin analysis is straightforward once the inputs are right. Getting reliable landed cost, SKU-level fees and ad spend tied back to the books is the work. Our fractional ecommerce CFO service builds and maintains this SKU-level model and uses it in monthly decisions on pricing, purchasing and advertising.
Questions sellers ask
What's the difference between gross margin and contribution margin?
Gross margin subtracts only product cost (COGS) from revenue. Contribution margin also subtracts every other cost that varies with the sale, such as Amazon referral and FBA fees, returns, storage and advertising. For Amazon sellers the gap is large because marketplace fees often exceed product cost.
Is storage a variable cost?
Mostly, at the SKU level. Storage scales with the units and space a SKU occupies, and slow sellers carry more storage per unit sold. Treat it as variable when comparing SKUs, using storage per unit sold over a recent period.
What is a good CM3 for an Amazon product?
There is no universal benchmark, because it depends on your fixed cost base and goals. Compare CM3 per unit against the fixed costs you need to cover. A SKU with a positive but thin CM3 can still be worth selling if it covers its share of overhead and turns quickly; a negative CM3 SKU loses money on every sale.